Aluminium composite panel installation methods

Aluminium composite panel is a new type of decorative material which has a series of excellent performance. It has been widely applied in curtain walls, indoor and outdoor decoration and other fields since it's created a new world for contemporary architectural decoration.
The quality, color and pattern or variety of the aluminium composite panel should meet the design requirements and have the product qualification term.



Types of methods suitable for aluminium composite panel

For installation, we can see most various types of methods suitable for aluminium composite panel (ACP) installation in the world

Aluminium composite panel of alucobond can be install in one of the three ways: route and return wet seal, route and return dry seal, and rain screen. While all three of these installation methods perform very well when fabricated, engineered and installed in a proper way. The suitable method can be used according to requirement and situation.

ACP board panels thcikness 3mm use only for Indoor

Aluminium composite panel installation on plywood for the uneven and blank wall, you can to choose the aluminium composite panels thcikness 3mm. Or choose the ACP who manufactured for indoor specification.
ACP indoor also called interiors usually have the thickness of aluminium composite panel layer 0.1mm or 0,2mm, and total thickness is 3mm. Its coating uses a polyester coating and acrylic coating.

ACP can be connected by suitable rivet

Aluminium composite panel can be connected with the panel or other materials by a suitable rivet. For outdoor or high humidity areas, it should use self-plugging rivet or screw fastener to avoid influencing the board of aluminium composite panel by corrosion, if you use rivet with an iron material, it must be extracted after connecting.

Composite panel can also be glued

Aluminium composite panel can also be glued to the wall with structural glue or nailing, and decorated with decorative side strips.

Composite panel can aslo joining by plastic welding

Aluminium composite panel can aslo joining by plastic welding but ist just used for pe core material. The connection of plastic by hot-air can also be used for the connection of aluminium composite panel, using heated air to melt polyethylene core and plastic welding rod of the aluminium composite panel by electrically heated welding gun, then connecting them after cooling, the following is the condition for good welding quality.

For outdoor installation ACP

Most various types of methods suitable for aluminium composite panel installation in the world, here ACP installation methods who recomendet by specialist
Below video is aluminium composite panel installation methods who recomendet by alucobond.
Subscribe to: Posts (Atom)

Aluminium composite panel